Waterman Industries Standard Electric Deep Water Reel

For generations, Waterman Industries of Florida, Inc. has produced quality commercial fishing equipment targeting independent fishing fleets. At Waterman Industries, we stand for unmatched craftsmanship in every product produced.

Features:

Powered by a 1/4 HP Scott 12 VDC electric motor.
Can be manually retrieved with provide handle.
Heavy duty 5/8″ diameter stainless steel spool shaft.
Replaceable drag washers
Fiberglass spring arm
Retrieval rate of 350 ft. per minute under a moderate load.
Plastic spool designed primarily for wire and cable use.
Aluminum spool upgrade recommended for use with monofilament and spectra fiber lines.
Spool capacity of 3500′ of 3/64″ stainless steel cable.
Frames and stanchions on all models are constructed from 1 1/4″ stainless steel pipe.
Stanchions are complete with a welded foot mount and a stainless steel strap style gunwale mounting bracket with a “T” type locking bolt.

Reel draws 19 Amps under minimum loading, but can draw up to 60 amps under heavy loads. The use of #4 wire for lengths less then 10 feet and #2 for lengths greater than 10 feet is recommended. Waterman Industries recommends a multi strand marine grade copper battery cable for wiring.

WARNING,
Hi-Liner Fishing Gear and Tackle will not be responsible for motors that have water damage. IT IS IMPORTANT TO COMPLETELY SEAL THE MOTOR. Coating the motor casting with enamel paint and or trying to seal the motor with silicone sealant, only delays moisture and condensation from entering the motor cavity. The best method, we have been told, is to apply silicone to the motor connections and using a two-part marine epoxy. Apply two or three heavy coats to the motor casing and or the gear box.