- OUR PRODUCTS
- Beeper & Tracking Buoys
-
Buoys
- Blocks and Rollers
- Boots
- Cable
- Chafe Gear
- Crimping Tools
- Crimps and Sleeves
- Cutters
- Deep Water Reels
- Descending Device
- Dye
- Gloves
- Harpoons
- Hy-Flyers
- Hooks
- Knives
- Landing Gear
- Light Sticks
- Longline Snaps
- Longline Spools & Accessories
- Monofilament Line
- Rain Gear
- Rigging Supplies
- Sashibo Tuna Grader
- Saws
- Sea Turtle Release Gear
- Snaps
- Strobes
- Swivels
- Swordfish Buoy Gear
- Miscellaneous
NOAA Weather
Moon Phase
Elec-Tra-Mate Tuna Brute III with Electronic Controls
Ele-Tra-Mate’s latest edition to their product line is their Tuna Brute III equipped with an electronic control unit which has some exciting new features that can be used in any trolling application but has been engineered to eliminate the guess work when your searching for giant tuna with a Greenstick.
The Tuna Brute’s controller can be programmed to consistently drop back your bird or lures to a distance behind your vessel stopping up to 6 times to put out your dropper baits and repeat this operation when you are reeling in your line.
Electronic Control Features:
- LCD Line Counter – Enter your line diameter in mm for extremely accurate display of line in feet, meters or fathoms.
- Automtic Shutoff at assigned HOME and FISH positions.
- Ability to set up to 6 additional Memory Positions – Unit automatically stops at each position dropping back or reeling in.
- Variable Speed Control to adjust speed depending on sea conditions.
- Alarm to notify when a fish hits or anything pulls on the line.
- Light Sensor automatically turns on backlight when it gets dark.
- Stores all Settings in memory for your next fishing trip.
Tuna Brute III Features:
- All Aluminum Construction, hard coat anodized to last a lifetime.
- Maximum Retrieve Speed – 393fpm.
- Emergency Handle for hand cranking if power is lost.
- 10” X 4” Spool holds 14,000 ft. of 200lb mono up to 1050 ft. of 1000lb mono or 10,200 ft. of 400lb Braid.
- Complete with Improved Heavy Action Flat Bar Rod w/ 3″ Block.
- Additional spools available in 10” x 4” or 10” x 2”
- Aluminum Dredge / Downrigger Booms are available in 24” and 36” lengths with 2 1/2” Roller machined for 400 lb. mono.
- Available in both 12 or 24 volts*
- Comes with either a standard Bolt-On 30 degree Gimble Rod Holder that is adjustable every 15 degrees of rotation or a 90 degree Vertical Rod Holder is available upon request at no difference in cost. A swivel base is also an Option.
*Both 12 and 24 volt units come with 8 ft. cord, single 70 Amp Twist-Lock Plug & Socket and a 3-position Toggle Switch (On – Off or Jog).
This entry was posted in Deep water reels. Bookmark the permalink. Both comments and trackbacks are currently closed.
